Stainless Threaded Inserts



NEW ~ Stainless Steel Threaded Inserts made in Missouri

These can be used with all of these products; stoppers, openers, and can tab pulls.  This is an original design from my manufacturer, they have a cap on the top so you don’t have to worry about glue getting into the threaded area.  They are 5/8″ high with the 3/8″ x 16 tpi thread and you would use the same 7/16″ drill bit as for the brass threaded inserts.  Always drill the hole 1/8″ – 3/16″ deeper to allow for compression.  These were design due to requests from customers who wanted stainless steel to compliment the products.  *note: these inserts need to be glued in to prevent them from getting loose if the wood ‘moves’; which all wood will do.